PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot.

M4 DIN 125A Class 200 HV Flat Washer Low Carbon Steel Zinc Plated

Price Per Piece: $0.0220

Part #:: 0000-196124
Minimum Purchase:: 100 pieces

PRODUCT SPECIFICATIONS (Part # 0000-196124)
Fastener Type:	Flat Washer
Size Description:	M4
Diameter/Nominal Size:	M4*
Inside Diameter:	4.3mm
Outside Diameter:	9.0mm
Thickness:	0.5mm
System of Measurement:	Metric
Property Class:	200HV
Material:	Low Carbon Steel
Finish:	Zinc Plated
Standards Met:	DIN 125A
Used with:	Bolts/Screws up to Class 12.9
Average Piece Weight:	0.0006000 lbs.

*Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit). Actual inside diameter is almost always larger than stated size. Please see the Inside Diameter spec in the table above, if available.

Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the washer. Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc.