PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot.

M18 DIN 125A Class 140 HV Flat Washer Low Carbon Steel Plain Finish

Price Per Piece: $0.1364

Part #:: 0000-114162
Minimum Purchase:: 50 pieces

PRODUCT SPECIFICATIONS (Part # 0000-114162)
Fastener Type:	Flat Washer
Size Description:	M18
Diameter/Nominal Size:	M18*
Inside Diameter:	19mm
Outside Diameter:	34mm
Thickness:	3.0mm
System of Measurement:	Metric
Property Class:	140HV
Material:	Low Carbon Steel
Finish:	Plain Finish (No Plating)
Standards Met:	DIN 125A
Used with:	Bolts/Screws up to Class 8.8
Average Piece Weight:	0.0324100 lbs.

*Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit). Actual inside diameter is almost always larger than stated size. Please see the Inside Diameter spec in the table above, if available.

Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the washer. Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc.