M12 ANSI B18.22M Class 200 HV Flat Washer Narrow Pattern Through Hardened - USA Medium Carbon Steel Zinc Plated

PRODUCT SPECIFICATIONS (Part # 0000-110481)
Fastener Type:	Flat Washer Narrow Pattern Through Hardened - USA
Size Description:	M12
Diameter/Nominal Size:	M12*
Inside Diameter:	13.30mm-13.57mm
Outside Diameter:	24.88mm-25.40mm
Thickness:	2.00mm-2.80mm
System of Measurement:	Metric
Property Class:	200 HV
Material:	Medium Carbon Steel
Finish:	Zinc Plated
Standards Met:	ANSI B18.22M
Average Piece Weight:	0.0147000 lbs.
Country of Manufacture:	United States

*Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit). Actual inside diameter is almost always larger than stated size. Please see the Inside Diameter spec in the table above, if available.

Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the washer. Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc.