PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot.

#10-16 x 1 1/2" (FT) Self Drilling Screw 6 Lobe Wafer Head #3 Point Low Carbon Steel Zinc Plated

Price Per Piece: $0.1905

Part #:: 0000-209792
Minimum Purchase:: 1000 pieces

PRODUCT SPECIFICATIONS (Part # 0000-209792)
Fastener Type:	Self Drilling Screw 6 Lobe Wafer Head #3 Point
Size Description:	#10-16 x 1 1/2" (FT)
Diameter/Nominal Size:	#10
Length:	1 1/2"
Wrench Size/Across Flats:	TX-20
Head Diameter:	0.441-0.516"
Head Height:	0.150"
Point Length:	0.258"
Thread Pitch:	16
Thread Direction:	Right
Thread Coverage:	Full
System of Measurement:	Inch
Material:	Low Carbon Steel
Finish:	Zinc Plated
Head Type:	Wafer
Drive Type:	6 Lobe
Point Type:	#3
Average Piece Weight:	0.0095000 lbs.

Self-Drilling Screws (sometimes incorrectly referred to as self-tapping screws) enable drilling without first creating a pilot hole. Self-drilling screws or (SDS's) are usually used to join materials like sheet metal to other materials, such as metal or wood.

Product Reviews

Write a Review

#10-16 x 1 1/2" (FT) Self Drilling Screw 6 Lobe Wafer Head #3 Point Low Carbon Steel Zinc Plated

Price Per Piece:

Total Quantity:

Total Price:

Product Reviews

Recommended Products

#10-16 x 1" (FT) Self Drilling Screw 6 Lobe Wafer Head #3 Point Low Carbon Steel Zinc Plated

#10-16 x 2" (FT) Self Drilling Screw 6 Lobe Wafer Head #3 Point Low Carbon Steel Zinc Plated

#10-16 x 1 1/4" (FT) Self Drilling Screw 6 Lobe Wafer Head #3 Point Low Carbon Steel Zinc Plated

#10-24 x 1 1/2" (FT) Coarse Thread Self Drilling Screw 6 Lobe Wafer Head #3 Point Low Carbon Steel Zinc Plated

#10-16 x 1" (FT) Self Drilling Screw 6 Lobe Truss Head #3 Point Low Carbon Steel Zinc Plated